Filter
Top Products
48 Hi-FiStereoSoundSystem
Multi-Channel Television Sound system broadcasts are automatically
recorded in Hi-Fi stereo sound, To play in Hi-Fi stereo the tapes
recorded in Hi-Fi stereo, however, you'll need to follow steps t-5.
• Before you begin, place the DVD/VCR inVCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press theVCR/TV button so that
theVCR/TV light appears on the front of the DVD/VCR.
I
Press the VCR button, then press the MENU button.
SII_LECT .. CHOOSE • !
_ PROGRAM
VCR SET UP
TUNER SETUP
SET CLOCK
O END PUSH EXiT
2
f
S_LECT Av CHOOSE •
REPEATPLAY OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
END PUSH EXIT
Press the PLAY button or the STOP button to selectVCR
SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select
AUDIO OUT, then press the F.FWD button.
IT ;
_HIFI ON
MONO
O END PUSH EXIT
4
Press the PLAY button or the STOP button to select
HIFI. ON will appear to the right of HIFI on the screen.
HIFI ON
MONO
TO ENO PUSH EXIT
5
Press the DISPLAYISTATUSIEXIT button.
5
C3 CDCZ3_
ED Eg O] ....
..... dJ0
E_TE_ _ETURN
_ _CDi
_o_ ,_,,,,;o_,,
Helpful Hints
Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But,you
can change the selection to MONO
if you want monaural audio playo
back.To do this,follow steps I-3.At
step 4, press the PLAYbutton or the
STOPbutton to select MONO. Press
the DISPLAY/STATUS/EXITbutton.
HIFI will disappear from the status
display.
All programs are automatJcally
recorded in both Hi-Fi stereo sound
and in monaural sound.
The audio level of a tape recorded in
Hi-Fi stereo will differ from the
audio level of a tape not recorded in
Hi-Fi stereo.
If you play non-Hi-Fi tapes while the
DVD/VCR is set to HIFI, HIFI will dis-
appear from the status display and
the tape will play in monaural
sound,
Please see additional notes
on page 79.