Filter
Top Products
TimerRecording(cont'd)39
Checking or CancellingTimer Recordings 2 4Before you begin, place the DVD/VCR inVCR mode. m
Press the DVD/VCR OUTPUT button so that theVCR light /
appears on the front of the DVD/VCR.
I
front of the DVD/VCR), press the VCR button, then press the
MENU button.
2
Press the PLAY button or the STOP button to select
PROGRAM, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select
PROGRAM REVIEW, then press the F.FWD button, The
timer recording informationfor the program in the lowest num-
bered slot will appear on the screen.If no timer recordings are
set, nothing will happen when you press the EFWD button.
m
C3 €23 El 0
CD (53
-I
-I
4
Press the F.FWD button repeatedly to review all pro-
grammed timer recordings. If you don't press the EFWD but-
ton within 10 seconds,the DVD/VCR witl automatically display
information about the next programmed timer recording.This will
continue until all timer recordings have been displayed.Then the
menu will disappear.
5
To cancel the timer recording displayed, press the CLEAR
button. Either the display wil! disappear or information about
other timer recordings will appear. If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I-4 to make sure you have cleared the cor-
rect timer recording.
Helpful Hints
CLASHmay flash on the screenwhen
youftnish settJnga timer recording.
This meansthat the timer recording
youjust programmed and another
timer recordingoverlap.The current
timer recordingwill not take place.You
may chooseto cancelthe overlapping
timer recording.
Tostop a started timer recording,press
the STOP/EJECTbutton or the TIMER
SET button on the front of the
DVDIVCR.
If the power fails for more than one
minute, programmedtimer recordings
will be lost.If this occurs,repeat the
steps onpages 16 and 20 before
resetting the timer recordings.
If the preset time for a timer record-
ing comes up during an OTR,the OTR
has priority.A messagewill remind you
when the timerrecordingwassched-
uled to begin.Youmay let the OTR
contJnue;the timer recordingwill not
take place.Or,stop the OTRand press
theTIMER SETbutton immediately.
Thetimer recordingwill take place if
you press theTIMER SETbutton
before the timer recording'sscheduled
start time.
;ee pa_e 78 for more hints.