Filter
Top Products
OptionalHookups(cont'd)13
Connectin_g to a TV and a Stereo
TV has Component Video In lacks
• Set DOLBY DIGITAL and DTS to OFF on the DVD/VCR. Detailsare onpages68-69. If you playa DVD when
the settingsare wrong, the sound will be distorted or you maydamagethe speakers.
I
COMPONENT
VIDEO IN
0'
_ Cb/B-Y
_ Cr,ql-Y
Back ofTV
(example only)
I
2
DVD/VCR
Back of Stereo
(example only)
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the red and white audio cables to the red and white DVD/VCRAUDIO OUT Jacks on
the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors
to the jack colors.
3
Connect an optional component video cable to the COMPONENTVIDEO OUT jacks on the
DVD/VCR and to the COMPONENTVIDEO IN jacks on theTV.
4
Plug in the Stereo's power cord.Turn on the Stereo and select the Stereo's Auxiliary IN station.
During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner's manual for details,
5
Plug in theTV's power cord.Turn on the'iV and set it to the ComponentVideo In channel,which
usually is located near channel 00. DuringAudio CD playback,youmay checkthe statusofAudio CDs on
yourTV screen.DuringDVD playback,youwill watch the programon the T_.Seeyour"iV owners manualfor
details.
6
Connect the DVD/VCR's power cord to a power outlet. Press the POWER button, then press the
DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. "HELLO" will appear
brieflyon the DVDNCR'S displaypanel.Youshouldseethe DVD logoon the'IV screenbriefly.If you do not,
checkyourconnectionsandmakesurethe'iV issetto the correct ComponentVideoIn channel.If there isno
discinthe DVDNCR,"no DISC" willappear on the displaypanel.