Filter
Top Products
Various settings
02
22
En
You can format, protect, or finalise a disc.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.).
• Select “DISC SETUP” from “SYSTEM SETUP”. For
the procedure, see steps 1 to 3 in “Using the
SETUP MENU” on page 19.
REFORMAT
You can format a recorded DVD-RW.
Check the content of the disc before format. If you
format the disc, the recorded content of the disc will
be erased.
To format a DVD in the Video mode, select “REFOR-
MAT AS DVD VIDEO”, and to format it in the VR
mode, select “REFORMAT AS DVD VR”.
The screen below will appear.
• When you select “START” and press ENTER,
format will start. The screen below will appear.
• When format finished, “REFORMATTING COM-
PLETED PRESS ENTER” will appear.
Press ENTER, the normal TV screen will appear.
• When you select “CANCEL” and press ENTER, the
DISC SETUP screen will appear.
NOTES:
•You cannot reformat DVD-R.
•You cannot reformat a disc if the disc protection is “ON”.
In such a case, be sure to cancel the disc protection
(see page 23) before format.
• During formatting, finalising and undo finalising, the
progress will be shown by “–” in the front display window.
Setting the clock
/01/05 00:0001
27/09/05 10:20
0
Your VCR/DVD is fitted with a 24 hour clock.
You must set the date and time for timer record-
ings.
Preparation:
•Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.).
• Select “CLOCK” from the “SYSTEM SETUP”
section of the SETUP MENU and press ENTER
(For the full procedure, see steps 1 to 3 in “Using
the SETUP MENU” on page 19).
Ex.: Setting the clock to “10:20” September, 27th, 2005.
1
Select the desired items using or (date,
month, year, hour and minute), then press ENTER.
2
Press or to set the value of the selected item.
3
Repeat steps 1 and 2 to set the date, year and
present time, and press ENTER. The SETUP
MENU will close.
This completes clock time setting.
To set the AUTO TIME
1
Select “AUTO TIME” from “CLOCK”.
2
Press ENTER, then press or to select ON
or OFF.
NOTES:
• In case of a power failure, the clock will continue to
operate for another 30 minutes with quartzcontrolled
precision. To indicate that the power failure has lasted
for an excessive period of time “0:00” will appear on
the display. In this case readjust time and date.
• When the AUTO TIME is set to ON, the unit
automatically corrects the clock setting.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
LANGUAGE
PARENTAL
CLOCK
DISC SETUP
OTHER
CLOCK
CLOCK (DD/MM/YY)
AUTO TIME
ON
01/01/05 00:00
SETUP MENU
RETURN SETUPENTER BACK END
SELECT SELECT
ENTER
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
DISC SETUP
REFORMAT AS DVD VIDEO
REFORMAT AS DVD VR
NEW DISC FORMAT
FINALISE
PROTECT DISC (VR ONLY)
UNDO FINALISE
PROCEED
VR
PROCEED
OFF
PROCEED
PROCEED
SETUP MENU
REFORMAT
START CANCEL
REFORMAT
Setting the disc
2H30301B_En_18_29 8/4/05, 19:2022