Filter
Top Products
57
En
Recording
05
VIDEO Plus+
PlusCode#
TYPE
OK
ONCE
1 2 3 4 5 6 7 8 9
ENTER
RETURN BACK
SELECT
ENTER
VIDEO Plus+
PlusCode#
TYPE
OK
ONCE
1 2 3 4 5 6 7 8 9
VIDEO
Plus+
END
OK
ONCE
DAILY
WEEKLY
3
Press to select “TYPE”.
Here you can set whether you want to record the program
ONCE, DAILY or WEEKLY. If you want to change it, press
ENTER then use the / buttons to select, then press
ENTER again.
4
Press to highlight OK, then press ENTER.
NOTES:
• If you’ve entered a valid
PlusCode number, a summary of
the timer recording appears. You
can edit any of this information as
necessary. Use the
/
buttons to select the item you
want to edit, press ENTER, then
use the
/ or / buttons
as appropriate to select, then
press ENTER again.
• VPS/PDC is a service provided by
the public TV station. When you se-
lect a VPS/PDC-compatible TV sta-
tion and activate the VPS/PDC
function, the beginning and the end
of the timer recording will be con-
trolled by the TV station. Any pro-
gram air time delays will be taken
care of. To make certain this works
correctly always enter the exact
starting time as published in the
news paper or TV listing magazine.
• When you use the VPS/PDC func-
tion, the recording start time may
be delayed by around 1 minute.
• If you use the VPS/PDC function
and timer recording to record con-
secutive programs on the same
channel, the 2 programs are re-
corded as a single title on a DVD.
When the programs are recorded
using a VCR, no VISS signal is in-
serted when the second program
starts.
• TYPE – select the frequency of the recording (more options
available here than in the previous screen, such as every
weekday)
•DATE (DD/MM) – the recording date
•START – recording start time
• END – recording end time
• CH – the channel to be recorded, or one of the external inputs
(AV1, AV2 or AV3)
• REC TO – record to the DVD or the VCR
• REC MODE – recording quality
• VPS/PDC – If you want to receive VPS/PDC signal, select
“ON” at step 4.
• Note that If you haven’t set a guide channel for the selected
TV channel, the CH field will be blank (
--
). In this case, set the
channel number manually.
2H30301B_En_54_62 8/4/05, 19:2457