Filter
Top Products
48
En
Tape playback
04
Special playback
NOTES:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.
Repeat playback
The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning
and the playback will be repeated.
1
Press REPEAT.
2
By pressing REPEAT
each time, “REPEAT
ON” or “REPEAT
OFF” is selected in
turn.
3
When “REPEAT ON” is selected, the tape is
played back to the end, and then, it is automati-
cally rewound to the starting point and played
back again.
To cancel repeat playback: Press REPEAT to
select “REPEAT OFF”.
Commercial skip
Press CM SKIP during playback.
The video is rapidly forwarded for approx. 30 seconds
and playback resumes.
You may press the button up to six times in a row to
move 180 seconds ahead.
To display VCR operation status
Press DISPLAY. The clock, day of the week and more
information will be indicated.
While watching TV
While operating a tape
To cancel the display: Press DISPLAY again.
REPEAT ON
CH 29
8 : 47 MON
00 : 00 : 00 SP
NICAM ST
DAY OF THE WEEK
CHANNEL
TAPE SPEED
REAL TIME COUNTER
CLOCK
STEREO
(displayed
only for
approx. 4
seconds)
8 : 30
MON
00 : 15 : 12 SP
L CH
HI-FI
OPERATING
MODE
TAPE IN
AUTO
REPEAT
HI-FI
STEREO
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRK (TRACKING) + or – to reduce the
noise bars.
If the still picture jitters excessively, press
TRK (TRACKING) + or – to stabilise the still picture.
Frame by Frame picture
Press PAUSE/STILL during playback.
Press SLOW one by one: The picture advances
frame by frame.
To return to playback: Press PLAY or PAUSE/STILL.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyses the signal to enable optimum picture quality
during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well
during playback, press TRK (TRACKING) + / or
TRK (TRACKING) – / to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for more severe
adjustments.
To return to automatic tracking, press ATR.
“AUTO TR.” will appear.
Slow motion
During playback press SLOW.
You can change the slow speed by the additional
pressing of SLOW.
To return to playback: Press PLAY.
Picture search
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Still picture
Press PAUSE/STILL during playback.
To resume normal playback: Press PLAY.
Indication for
the selected
playback
sound
(e.g.: L CH =
VCR
Left Channel) (displayed
only for approx. 4 seconds.)
2H30301B_En_46_49 8/4/05, 19:2348