Filter
Top Products
46
En
Tape playback
04
Tape speed and maximum recording time
Loading and unloading a cassette tape
Use only video cassette tapes marked
.
Erase prevention tab
Erase prevention tab
Screwdriver
Loading
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
You can eject the video tape while the unit is turned off.
1
Press (EJECT) on the unit or the remote
control.
2
Remove the cassette tape.
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewound to its
beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Adhesive
Tape
To record again
Cover the hole with a piece of adhesive tape.
Video cassette tape
E-30
30 min.
1 hour
E-60
1 hour
2 hours
Standard Play (SP)
Long Play (LP)
E-90
1 1/2 hou.
3 hours
E-240
4 hours
8 hours
E-180
3 hours
6 hours
Tape speed
We recommend using E-180 video tapes or shorter.
VCR
• HQ VHS is compatible with existing VHS equipment.
2H30301B_En_46_49 8/4/05, 19:2346