Filter
Top Products
76
En
Editing the disc
06
Using the keyboard screen
This section explains the function of the keyboard screen
and how to input characters. The disc name and the title
name can be changed using the keyboard screen.
Keyboard screen types
The keyboard screen has three types of “Letters”,
“Numbers” and “Signs”. The type can be switched over
by pressing REW or F.FWD.
Letters: This is mainly used for inputting alphabetical
letters.
For the keyboard screen of Letters, see the
previous page.
Numbers: This is used for inputting numbers.
Signs: This is used for inputting symbols.
Live Show
Numbers
Signs
Letters
1
< >
2 3
Back
Exit
4 5 6
7 8
0
9
CANCEL
RETURN
DISPLAY
OK
DISPLAY
OK
Inputting characters
Live Show
Numbers
Signs
Letters
1
) !< > ,
2
? @ #
3
& % / Back
Exit
0
Space bar
4
. * _
5
- + =
6
[ ] :
7
¨; \ ‘
8
< > $
9
:·) :·( ;-/ :·}
CANCEL
RETURN
DISPLAY
OK
DISPLAY
OK
There are two methods for inputting characters.
Character input 1
1
Press , , or to select the character to
be input.
2
Press ENTER.
The selected character will be input.
Character input 2
Example: Explained here is the procedure when you
input “F” and “J”.
1
Press the numeric keys where a character you
want to input is assigned.
3
d
e f
2
Press the numeric keys continuously and select
the character to be input.
To input F, press 3 three times.
3
d
e f
NOTE:
When the interval between the pressing numeric
keys is 2 seconds or more in selecting the input
character, the selected character will automatically be
input.
3
Stop the key operation when you select the
character to be input.
The selected character will automatically be
input.
F
4
Press the numeric keys where the following
character is assigned.
5
j
k l
Fj
5
When the character to be input is selected, stop
the key operation.
The selected character is automatically input.
2H30301B_En_72_77 8/4/05, 19:2676