Filter
Top Products
Additional information
08
85
En
SYSTEM ERROR
PLEASE WAIT
SYSTEM ERROR
PLEASE WAIT
DISC CHECKING
SYSTEM ERROR
DISC MIGHT BE FAILED
PRESS ENTER
NO DISC
REGION CODE ERROR
INCORRECT DISC - C104, C105,
C106, C107
PROGRESSIVE OUTPUT. STOP
DISC PLAY BACK THEN PRESS
PROGRESSIVE TO CANCEL.
Error/Warning message list
--
ERROR/WARNING MESSAGE
CAUSE POSSIBLE SOLUTIONS PAGE
NOTE: It is possible that other warning messages other than this listed above could appear.
If this happens, please check the possible solutions above as they could still provide an explanation.
The power was shut down without completing the
termination process due to a power failure or dis-
connection of the AC cord plug. (Abnormal termi-
nation)
The power was abruptly turned off before writ-
ing to the disc was completed.
The data restoration was completed.
PLAY was pressed when a disc was not loaded
into the unit.
A disc specified other than “Region 2” or “Region
ALL” was loaded.
The disc cannot be identified.
Wait until the message disappears.
The data is now restoring.
Press ENTER, then the screen re-
turns to the normal display. The data
may not be restored even if the res-
toration process is performed.
Load a disc.
A disc specified other than “Region
2” or “Region ALL” cannot be played
back.
Check to make sure that the disc is
compatible with this unit.
--
50
30
9
9
Playback
Power ON
REC was pressed when a disc was not loaded
into the unit.
The recording termination is processing.
Disc became full during recording.
Recording was tried onto the disc having no space.
Recording was tried onto the disc which does not
support recording.
Disc erase-protection is applied.
Recording was tried onto the finalised disc.
Adding data was tried onto the disc recorded in
the other unit.
Adding data was tried to the disc where PC data
was recorded.
A scratch or contamination was found on the disc.
99 titles were recorded on the disc.
Load a disc.
Wait until the process is completed.
Erase unnecessary titles or load
another disc and restart recording.
Check the disc space.
Load a recordable disc.
Set “Protect disc” to “OFF”.
Undo finalisation or load another
disc for recording.
Load another disc for recording.
Load another disc for recording.
Check the disc and reload it, or use
another disc for recording.
Erase unnecessary titles or load
another disc.
--
52
32
10
23
23
--
--
--
74
71
51
51
51
74
999 chapters were existed on the disc.
You tried to record a copy-guard video.
The video was changed to a copy-guard format
in recording.
Yo u tried to record the “Copy Once” program onto
a disc (Video mode).
Yo u tried to record the “Copy Once” program onto
a disc without CPRM.
Erase unnecessary chapters or
load another disc.
You cannot record the video con-
taining copy-guard signal.
You cannot record the video con-
taining copy-guard signal.
Load a DVD-RW Ver. 1.1/1.2 (VR
mode) with CPRM.
Load a DVD-RW Ver. 1.1/1.2 (VR
mode) with CPRM.
51
NO DISC
PROCESSING PLEASE WAIT
RECORDING INTERRUPTED -
C204
CANNOT RECORD - C203
CANNOT RECORD - C206
CANNOT RECORD - C207
CANNOT RECORD - C208
CANNOT RECORD - C209
CANNOT RECORD - C210
DISC ERROR - C205, C211, C212,
C213
CANNOT RECORD EXCEEDS LIM-
ITED NUMBER OF TITLES.
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF CHAPTER.
CANNOT RECORD PROTECTED
IMAGE.
RECORDING INTERRUPTED PRO-
TECTED IMAGE.
CANNOT RECORD IN VIDEO MODE.
COPY IMAGE ONCE ONLY.
CANNOT RECORD ON DISC.
THIS IS NOT CPRM DISC.
TIMER RECORDING ERROR
PLEASE CHCK THE DISC OR TAPE
Recording
When the unit was not connec-ted to the TV with
the component video cables, PROGRESSIVE
was pressed.
Press PROGRESSIVE in the stop
mode to make the progressive
scanning mode inactive.
45
No video tape or disc is inserted as a source for
the recording.
The source video or disc to be copied is copy-
guarded.
The video tape or disc became full during dubbing.
Cannot Format disc due to a scratch or contami-
nation on the disc.
Cannot Finalise disc due to a scratch or con-
tamination on the disc.
Cannot Undo Finalise disc due to a scratch or
contamination on the disc.
Cannot Protect disc ON/OFF due to a scratch
or contamination on the disc.
Editing cannot be performed due to a scratch or
contamination on the disc.
Combining chapters cannot be performed.
Load a video tape or disc into the
source drive.
You cannot dub a video containing
copy-guarded material.
Load another video tape or disc for
recording and restart.
Check the disc and reload it, or use
another disc for recording.
Check the disc and reload it.
Check the disc and reload it.
Check the disc and reload it.
Check the disc and reload it, or use
another disc for recording.
Chapter marks that have been
added automatically in the erasing
of a scene procedure cannot be
erased.
78, 79
51
78, 79
--
88
88
88
--
A process requiring a longer time such as edit-
ing is being performed.
Wait until the process is complete.
--
73
CANNOT COPY DATA - C251
CANNOT COPY DATA - C254, C255
COPYING INTERRUPTED
DISC ERROR - C302, C303
DISC ERROR - C304, C305
DISC ERROR - C306
DISC ERROR - C307, C308
CANNOT EDIT
CANNOT EDIT - C408
PROCESSING PLEASE WAIT
Dubbing
Disc setup
Title Menu
When a recordable tape is not inserted or no disc
space is available, TIMER REC was pressed.
Load a recordabl tape or disc.
58, 61
85
En
2H30301B_En_82_Back 8/4/05, 19:2785