Pioneer DVR-RT501-S DVD Recorder User Manual


 
Various settings
02
24
En
This section describes settings about the screen.
Preparation:
•Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.).
Select “VIDEOfrom “AV SETUP”. For the
procedure, see steps 1 to 3 in “Using the SETUP
MENU” on page 19.
TV SCREEN
You can select the TV screen size to suit the screen
image.
Select “TV SCREEN” and select screen size from the
list below.
4:3 Panscan
It displays a wide picture across the whole screen
with left and right edges automatically cut off.
4:3 Letter box
Select this mode when connecting to a
conventional TV. When playing back a wide screen
DVD disc, it displays a wide picture with black
bands at the top and bottom of screen.
16:9
Select this mode when connecting to a wide-screen
TV. A wide-screen picture is displayed in full size.
NOTE:
If you select “4:3 Pan Scan” but the DVD disc is not
formatted in the pan scan format, the aspect ratio will
be displayed as “4:3 Letterbox”.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
SETUP MENU
TV SCREEN
STILL MODE
NO NOISE BACKGROUND
BRIGHTNESS
DVD OUTPUT
AV3 INPUT
4:3 Letter box
AUTOMATIC
ON
STD
RGB
VIDEO
VIDEO
ENTER RETURN SETUPBACK END
SELECT
ENTER
Other (SYSTEM SETUP)
You can turn the display window and screen
display “ON” or “OFF”.
Preparation:
•Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.).
Select “OTHERfrom “SYSTEM SETUP”. For the
procedure, see steps 1 to 3 in “Using the SETUP
MENU” on page 19.
DIMMER (Brightness of the display
window)
You may adjust the brightness or turn off the display
on the front panel of the unit.
Select “DIMMER” and select the display window
status from the list below.
AUTOMATIC:
When the power is on, the display
window appears bright. When the
power is off, it appears dark.
DIM: The window display always appears
dark.
OFF: When the power is on, the display
window appears dark. When the
power is off, it is turned off.
DISPLAY/CALL (Turning the screen
display “ON” or “OFF”)
You can turn off the screen display that is output to
the TV screen by this unit. Select “DISPLAY/CALL”,
and select “ON” or “OFF”.
ON: The screen display appears.
OFF: Nothing but the SETUP MENU and error
messages appear.
In the OFF selection, The DISPLAY button on the
remote control will be available.
SPRACHE
RATING
UHR
DISC SETUP
OTHER
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
SETUP MENU
OTHER
DIMMER
DISPLAY/CALL
AUTOMATIC
ON
ENTER RETURN SETUPBACK END
SELECT
ENTER
Setting the screen
2H30301B_En_18_29 8/4/05, 19:2024