Q-Logic 9100 TV Video Accessories User Manual


 
5–Customer Replaceable Units
Replacing Fan Blades
59229-05 A 5-23
Removing a Fan Blade
To remove a Fan blade, rotate the latch to the full open position. Pull the Fan
blade by the latch to disengage the blade from the midplane connector as shown
in Figure 5-5. Carefully slide the Fan blade from the chassis.
Figure 5-5 Removing a Fan Blade
Installing a Fan Blade
To install a Fan blade, do the following:
1. Open the Fan blade latch and slide the blade into the chassis until it contacts
the midplane connector.
2. Rotate the latch right-to-left to lock the Fan blade in place.
3. Observe that the Fan blade Power LED is illuminated.
4. Confirm the Fan blade status. Open a Telnet session and enter the Show
Chassis command to display the operational status of the Fan blade