Filter
Top Products
3–Installation
Installing a Switch
59229-05 A 3-19
Start Enterprise Fabric Suite 2007
To start Enterprise Fabric Suite 2007, do the following.
1. Start the Enterprise Fabric Suite 2007 using one of the following methods:
For Windows, double-click the Enterprise Fabric Suite 2007 shortcut,
or select Enterprise Fabric Suite 2007 from Start menu, depending
on how you installed the Enterprise Fabric Suite 2007 application.
From a command line, you can enter the
Enterprise_Fabric_Suite_2007 command:
<install_directory>Enterprise_Fabric_Suite_2007.exe
For Linux, Solaris, or MacOS X, enter the following command:
<install_directory>./Enterprise_Fabric_Suite_2007
2. In the Initial Start dialog, click the Open Configuration Wizard button. The
Configuration Wizard recognizes the switch and leads you through the
configuration process.
NOTE:
After the switch is operational, you can also open the QuickTools web
applet, by entering the switch IP address in an internet browser. Refer to the
SANbox 9000 Series Enterprise Fabric Suite 2007 User Guide for more
information.