Filter
Top Products
Using the “Conference Manager” software
102
To change the speaking time limit:
̈ In the “Talk Time” box, enter the desired speaking time limit into the drop-
down list field (see also page 91).
Changing the conference mode ̈ From the “Mode” drop-down list in the “Conference” box, select the desired
conference mode
(see page 90).
Changing the maximum number of
speakers who can take
the floor simultaneously
̈ From the “Open” drop-down list in the “Conference” box, select the maximum
number of speakers who can take the floor simultaneously (see also page 91).
Changing the maximum number of
requests to speak
̈ Change the
maximum number of requests to speak (see page 91).
Changing the behavior of the
signa
l light ring when a
request to speak is made
̈ Change the behavior of the signal light ring when a request to speak is
made (see page 91).
Exiting the “Live” operating mode
You can exit the “Live” operating mode by call
ing up the “Setup” operating mode:
̈ Click the “Setup” button.
The “Stop” warning message appears.
̈ Click “OK”.
The software switches to “Setup” operating mode and the View windows
change their appearance accordingly. A running conference is not interrupted.
Using the log and diagnosis function – “Event Log“
The log and diagnosis function allows you to log all changes to the conference
system. As soon as a change to the system or an error is detected, the button
on the toolbar changes to .
To start the “Event Log” function:
̈ Click the button on the toolbar.
Or, if the “Processing” window is displayed:
·
·