Filter
Top Products
Using the “Conference Manager” software
52
Adjusting the network settings To enable communication between the central unit and the Windows PC:
̈ Make sure that the network communication between the central unit and
the
Windows PC is not blocked by a proxy server and/or a firewall.
Ports 53248, 53249, 53250, 53251 are used for commun
ication and port 21 is
used for FTP transfer.
̈ Ask your system administrator if a static IP address is to be used or if the IP
ad
dress is to be allocated dynamically.
If you have to use a static IP address, as
k for the subnet mask and the standard
gateway.
̈ Use the information provided by your system administ
rator to adjust the
network settings of your central unit. Proceed as described under b) in the
table on page 54.
If you have to make the decision whether to
use static or dynamic IP addressing,
proceed as follows:
If the central unit is directly connected to a Windows PC, we recommend
dynamic IP address allocation. Adjust the network settings of the PC and
the central unit as described under a) in the table on page 53.
The devices automatically detect whether IP add
r
ess allocation is via
DHCP or Zero Configuration Networking (Zeroconf). This process can take
several minutes.
Windows XP Windows Vista Windows 7
̈ Click “Start” and then select “Control Panel”.
The “Control Panel” window appears.
̈ Double click “Network and Internet
Connections”:
The “Network and Internet connec-
tions” window appears.
̈ Click “View network status and
tasks”:
The “Network and Sharing Center”
window appears.
̈ Click “View network status and
tasks”:
The “Network and Sharing Center”
window appears.
ባ
ባ
ባ