Filter
Top Products
Configuring the conference system via the central unit
26
̈ Press the jog dial.
Your setting is stored. You are back to the operating menu.
Canceling an entry
Or:
To subsequently directly return to the last edited menu item:
Exiting the operating menu
Or:
Adjusting the conference settings – “Conference”
The settings available in the “Conference” menu item affect the behavior of the
entire conference system during a conference.
Adjusting the conference mode – “Conference Mode”
Possible settings: “Direct Access”, “Override” and “Request”.
•“Direct Access” mode and “Override” mode:
These two conference modes do not requir
e the use of a chairman unit.
By briefly turning the jog dial to the left or right, the next or the previous
menu item or setting is displayed.
If you turn the jog dial to the left or right and hold it in this position, the
menu items or settings change in quick succession (“fast search” function).
̈ Press the ESC key.
The operating menu or the next highe
r menu level appears.
̈ Press the standard display key.
The standard display appears.
̈ Press the jog dial repeatedly until the last edited menu item appears.
̈ Press the standard display key.
The standard display appears.
̈ Press the ESC key repeatedly until the standard display appears.
CAUTION Interruption of a running conference
If you adjust settings in the “Conference” menu item during a
running conference, the conference will be interrupted.
̈ Inform the participants that the conference settings are being
changed
and that they might have to make a new request to
speak.
Select and call up the
“Conference” submenu
Select and call up the
“Conference Mode”
menu item
Select the desired
setting; store the
setting
Main Menu
Conference
Audio
System
Conference
Conference Mode
Microphone Limit
Request Limit
Conference Mode
Direct Access
Override
Request
Direct AccessDirect Access