Filter
Top Products
23
Configuring the conference system via the central unit
Display Function of the menu item Option/display Page
“Main Menu”
“Conference” Calls up the “Conference” submenu – 26
“Audio” Calls up the “Audio” submenu – 31
“System” Calls up the “System” submenu – 34
“Languages” Adjusts the language “Deutsch”, “English”,
“Espanol”...
41
“Settings” Calls up the “Settings” submenu –
“Conference” menu
“Conference
Mode”
Adjusts the conference mode “Direct Access”,
“Override” or “Request”
26
“Microphone
Limit”
Sets the maximum number of speakers who can take the
floor simultaneously in “Direct Access” and “Override” mode
“1” ... “10” 27
“Request Limit” Sets the maximum number of requests to speak in “Request”
and “Direct Access” mode
“0” ... “10” 28
“Talk Time Status” Activates/deactivates the speaking time limit “On“/“Off” 28
“Talk Time Limit” Sets the speaking time limit “01” ... “60”
in steps of 1 minute
28
“Premonition Time
Limit”
Sets the advance warning time (warns speakers that they
are approaching the end of the individual speaking time)
“00” ... “120”
in steps of 10 seconds
28
“Reaction on
Talktime Exceed”
Determines the behavior when the individual speaking time
is exceeded
“Continue“/“Cancel” 29
“Blink on Request” Activates/deactivates the flashing of the signal light ring
when a request to speak is made
“On“/“Off” 30
“Re-Init” Re-initializes the conference units “Yes“/“No” 30
“Clear Request List
on Cancel”
Sets the function of the priority key of the chairman unit
“On“/“Off” 30
“Audio” menu
“XLR Out” Calls up the “XLR Out” submenu – 31
“XLR In” Calls up the “XLR In” submenu –
“Floor/
Loudspeakers”
Calls up the “Floor/Loudspeakers” submenu –
“Audio Gain
Reduction”
The sum signal of all active conference units is output via
the floor channel (“Floor/Loudspeakers”). The “Audio Gain
Reduction” menu item allows you to adjust how the volume
levels of the signals of the individual conference units are
processed.
“0.0 dB per Mic” ...
“−3.0 dB per Mic”,
“Linear Division”
32
“XLR Out” menu
“XLR Out Status” Activates/deactivates the OUT audio output “On“/“Off” 31
“XLR Out Volume” Adjusts the volume of the XLR output
“01” ... “32”
“XLR Out
Equalizer”
Adjusts the tone color of the XLR output
“−12 dB” ... “+12 dB”
+02 dB
–03 dB
+05 dB