Filter
Top Products
Using the “Conference Manager” software
54
Settings to be adjusted via the central unit (see page 42):
̈ On the central unit, call up the “IP Mode” menu item.
̈ Select “Dynamic IP”.
The central unit is automatically integrated in the network and no further steps have to be taken.
b) The Windows PC is assigned a static IP address in the network:
Settings to be adjusted via the central unit (see page 42):
̈ On the central unit, call up the “IP Mode” menu item.
̈ Select “Static IP”.
̈ Determine the network part of the IP address of the Windows PC and note it down:
In this example, the network part is “192.168.1”.
̈ On the central unit, call up the “IP-Address” menu item:
̈ Set the network part of the IP address to the value retrieved from your Windows PC.
̈ Set the device part (the last three digits) of the IP address to a value (“1” - “254”) that is neither used by your PC nor
by another computer in your network (in this example, the device part must not be “145”).
Windows XP Windows Vista Windows 7
Main Menu
Settings
Network
IP Mode
Main Menu
Settings
Network
IP Mode
network part
device part
192 . 168 . 1 . 145
Main Menu
Settings
Network
IP Address