Filter
Top Products
33
Configuring the conference system via the central unit
Behavior “0.0 dB per Mic” ... “–3.0 dB per Mic” setting:
With each additional audio signal, the volume level of the floor
channel is reduced by the adjusted value.
̈ Try out the different settings by activating the maximum
number of open channels (see page 45).
The floor channel should be heard at the desired volume level
without any distortion or feedback.
̈ First start with low values.
“Linear Division” setting:
The volume level of the floor channel is automatically reduced
depending on the number of conference units (high gain reduction
of the audio signal).