Filter
Top Products
110
Inserting a “Memory Stick”
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the v mark
facing up as illustrated.
Ejecting the “Memory Stick”
Slide the MEMORY EJECT lever in the direction of the arrow.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording data on the “Memory Stick.” Do not turn the power
off, eject the “Memory Stick” or remove the battery pack. Otherwise, the image data
may be corrupted.
If “ MEMORYSTICK ERROR” is displayed
Remove the “Memory Stick,” then insert it again. If the message is still displayed, the
“Memory Stick” may be corrupted. Use another “Memory Stick.”
Using a “Memory Stick” – introduction
“Memory Stick” slot
Access lamp
MEMORY EJECT