Filter
Top Products
168
Types of trouble and their solutions
When operating using a “Memory Stick”
– DCR-IP7BT only
Symptom Cause and/or Corrective Actions
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 108).
• You may not be able to play back images in actual size
when you try to play back images recorded by other
equipment. This is not a malfunction.
• No audio was recorded on the file.
Others
Symptom Cause and/or Corrective Actions
• The 20 numbers of titles is already recorded.
c Erase unnecessary titles (p. 94).
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab so that the red portion is not
visible (p. 27).
• COMMANDER is set to OFF in the menu settings.
c Set it to ON (p. 102).
• Something is blocking the infrared rays of the Remote
Commander.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity (p. 192).
• The batteries are dead.
c Insert new ones (p. 192).
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD (p. 102).
• The VIDEOINPUT setting in the menu settings is wrong.
c Set it to the appropriate position.
The title is not recorded.
The Remote Commander supplied
with your camcorder does not
work.
The picture from the TV or VCR
does not appear even when your
camcorder is connected to outputs
on the TV or VCR.
The photo save function does not
work.
You cannot play back images in
actual size.
No audio during playback.