Filter
Top Products
137
“Memory Stick
” Operations
Viewing a still image
– Memory photo playback
– DCR-IP7BT only
You can play back still images recorded on a “Memory Stick.” You can also play back
six images (including moving pictures) in order at a time by selecting the index screen.
Before operation
Insert the “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR.
(2) In MEMORY mode, select PLAY, then press the center z on the control button.
In VCR mode, select
PB, then press the center z on the control button.
The last recorded image is displayed.
(3) Select –/+, then press the center z on the control button to select the desired
still image.
– : to see the previous image
+: to see the next image
To stop memory photo playback
Select CAM or VCR, then press the center z on the control button.
Note
Playback images recorded on the “Memory Stick” are not output:
•From the i.LINK (MICROMV) jack.
•From the A/V jack if the i.LINK cable is plugged into the camcorder.
Notes on file names
•The directory number may not be displayed and only the file name may be displayed
if the structure of the directory does not conform to the DCF standard.
•“ - DIRECTORY ERROR” may appear on the screen if the structure of the
directory does not conform to the DCF standard. While this message appears, you can
play back images but cannot record them on the “Memory Stick.”
•The file name flashes on the screen if the file is corrupted or if the file is unreadable.
2
PLAY
1
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE