Filter
Top Products
90
Superimposing a title
(6) If necessary, change the color, size, or position by selecting COLOR, SIZE, POS
r or POS R, then press the center z on the control button repeatedly.
(7) Select TITLE OK, then press the center z on the control button.
(8) Select SAVE TITLE, then press the center z on the control button.
The “TITLE” indicator appears. And when you press START/STOP to start
recording, “TITLE SAVE” appears on the screen for about 5 seconds and the
title is set.
If you set the write-protect tab to lock
You cannot superimpose a title. Slide the write-protect tab to release the write
protection.
To use a custom title
If you want to use a custom title, select in step 4 (p. 95).
If the tape has a blank portion
You cannot superimpose a title on the blank portion.
If the tape has a blank portion in the middle of the recorded portions
The title may not be displayed correctly.
To not display title during playback
Set TITLE DSPL to OFF in the menu settings (p. 102).
6,7
8
VACATION
COLOR
RET.
POS r
STBY
SIZE
TITLE
OK
EXIT
POS R
VACATION
RET.
STBY
SAVE
TITLE
EXIT
VACATION
RET.
SAVE
TITLE
EXIT STBY
VACATION
–0:00:30
TITLE
FN