Filter
Top Products
52
Using the fader function
(1) When fading in [a]
In standby mode, select FN, then press the center z on the control button. The
PAGE1 screen appears.
When fading out [b]
During recording, select FN, then press the center z on the control button. The
PAGE1 screen appears.
(2) Select FADER, then press the center z on the control button. The FADER
screen for selecting the fader mode appears.
(3) Select the desired fader mode, then press the center z on the control button.
The top of the selected button is indicated with a green bar.
(4) Press DISPLAY to turn off the screen buttons.
(5) Press START/STOP. The fader indicator flashes, then lights up. After the fade
in/out is carried out, your camcorder automatically returns to the normal
mode.
To return to the FN screen
Select OK, then press the center z on the control button after step 3. The PAGE1
screen appears. Next, select EXIT, then press the center z on the control button.
To cancel the fader function
Before pressing START/STOP, select OFF, then press the center z on the control
button.
Note
You cannot use the following functions while using the fader function, and vice versa.
– Digital effect
– Tape Photo recording
1
4
FN
FADER
OFF OK
NORM.
FADER
MONO–
TONE
BOUN–
CE
MOSC.
FADER
2,3
FADER
5