Filter
Top Products
84
4,5
2
6
FN
3
MENU
1
VCR SET
VIDEOINPUT
RETURN
VIDEO
VCR SET
VIDEOINPUT
RETURN
VIDEO
S VIDEO
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE
Recording a program
When using the A/V connecting cable
You can record or edit a program from another VCR that has video/audio outputs. Use
your camcorder as a recorder.
1 Switching the video input jack of the A/V connecting cable
The supplied A/V connecting cable is equipped with an S video plug and a video plug.
You have to select one of the jacks in the menu settings. The default setting is VIDEO. If
the setup is not necessary, go to “2 Making a recording” on page 85.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the center z on the control button. The PAGE1 screen
appears.
(3) Select MENU, then press the center z on the control button. The menu
appears.
(4) Select VIDEOINPUT via
, then press the center z or B on the control
button.
(5) Select VIDEO or S VIDEO, then press the center z on the control button.
(6) Press DISPLAY to turn off the menu. Pressing DISPLAY again displays the
video control buttons.