Filter
Top Products
14
Programmable items of On-PC
Setup and On-Remote Setup
*1 System Control function is used to perform
a programmed series of commands (a
macro) on several AV components by
pressing just one button.
*2 An XPRESS function is also a macro
function which executes a series of
commands for controlling several AV
components by pressing just one key. The
difference is, the XPRESS display stays
available for you to make additional
settings.
*3 An Air-Slide is a function which executes
an XPRESS function by “sliding your
finger” in a set pattern across the display.
Setting procedure for On-
PC Setup
If you set up the Remote Commander
using On-PC Setup (recommended),
follow the procedures below.
Step1: Installing the “AX Remote
Editor” (page 16).
Step2: Installing the USB driver
(page 17).
Step3: Starting up “AX Remote
Editor” (page 20) and setting
the Remote Commander.
See the Help file of AX Remote
Editor for setting details.
Step4: Operating an AV
component using the Remote
Commander.
After finishing the setting with AX
Remote Editor, operate the AV
component using the Remote
Commander.
• Operating the XPRESS function
(page 22).
• Operating components
individually (page 27).
Option1: You can also change the
Unit Settings such as the
backlight and beep (pages 34,
41).
Option2: You can also change the
settings of the buttons or keys
on the Remote Commander
with AX Remote Editor.
See the Help of AX Remote Editor for
setting with AX Remote Editor.
Main setting
items
Setting the
preset codes
Learning the
remote control
signals
Editting the
label
Setting the
Timer
Programming
the Timer
Setting System
Control
function *1
Setting XPRESS
function *2
Setting Air-
Slide function *3
Unit settings
Using the AX
Remote Editor
a
a
a
a
a
a
a
a
a
Using the Remote
Commander
a
a
a
a
a
a
×
×
a
Remote Commander settings and
operating procedures (continued)