Filter
Top Products
46
4 Select the component name you
want the Remote Commander to
preset by pressing the Label key
(in this case, TV).
TV
The “TV” and current preset code (in
this case, “8001”) appear as the Label
keys.
“0” - “9,” “CLEAR” and “POWER”
flash.
PRESET
213
546
8
0
79
POWER
CLEAR
LEARN
NG
TV 8001
Note
If another remote control signal has already
been learned, the delete confirmation message
appears. Register the components after deleting
the learned signal following the procedure of
the LCD display.
PRESET
SU
LEARN
NG
DELET LEARN? YES NO
5 Press the “8,” “0,” “1,” and “1”
number keys.
Tip
Each time the CHANNEL +/– button is
pressed, the preset code increases/
decreases by 1.
If you make a mistake in
inputting
Press the CLEAR key. The preset code
returns to the previous number.
6 Press the OK button.
OK
A beep sounds and the input preset
code appears on the Label key
momentarily.
PRESET
SU
LEARN
NG
TV TV 8011 OK
“PRESET” appears as the Display
title.
PRESET /1
SU
LEARN
NG
TV A-CBL D-SAT DVD
7 Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
Setting the preset codes
(continued)