Filter
Top Products
5
Learning function lets you program
other remote control signals you may
need
The Remote Commander’s learning
function can learn the remote control
infrared signals of non-preset
components. The Remote Commander
can learn remote control signals (infrared
signals only) of other devices such as air
conditioners, lights, etc. (some specific
appliances or functions may not be
available).
System Control function executes a
series of commands (a macro) by
pressing one button/key
The Remote Commander has special
buttons/keys, which can be programmed
to perform a series of commands (a
macro) just by pressing one button/key.
You can program up to 8 System Control
macros.
KeyMacro function allows you to
select a channel with a single key
The Remote Commander allows you to
program a macro for a key to operate an
AV component. For example, you can
create a macro that enters the numbers 1,
2, and 3, to select channel 123 just by
pressing one key.
The AX Remote Editor software allows
you to make advanced settings for the
Remote Commander.
Easy-to-operate Touch-key LCD with
blue back light
The Remote Commander has a Touch-
key LCD that changes keys and labels
according to the selected component. The
Remote Commander is easy to operate as
only the keys necessary to operate the
selected component are shown. The
display backlight allows operation even
in the dark.
“AX Remote Editor” for easy Remote
Commander setup
The supplied software “AX Remote
Editor” allows you to set up the Remote
Commander on your PC and download
the settings to the Remote Commander.
Various advanced settings can also be
made easily on your PC.