Filter
Top Products
25
Operating the Remote Commander
5 Press the key(s) or button(s) you
want to operate.
When the signal is sent, appears.
You can also use other buttons, such
as the VOLUME +/–, CHANNEL +/–,
MUTING, cursor, and MENU buttons.
6 When you are finished using the
Remote Commander, press the
COMMANDER OFF button.
OFF
COMMANDER
The Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button, the previous LCD
display returns.
To synchronize with the status of
a component – SYNC-UP
EPG
MENU
SYSTEM CONTROL
OK
1 MORE43
COMPONENT
VOLUME
BACK
X
PRESS
2
RECALL
LIGHTTIMER
MUTING
SYNC-UP
CHANNEL
EXIT TOOLS
ALL OFF
LEARN
NG
OFF
COMMANDER
The Remote Commander memorizes the
status of the components’ input selectors,
and power on/off. However, if you turn
on/off the component manually or with
a different remote control, the Remote
Commander will not recognize the
current component status. In this case,
press the SYNC-UP button to
synchronize with the status of the current
component and the Remote Commander.
1 Press the SYNC-UP button.
SYNC-UP
The component you want to confirm
the status of appears as the Display
title.
TV
SU
AM
POWER
DONE
LEARN
NG
SET ON FOR POWER OF TV
SYNC-UP button
Continued