Filter
Top Products
30
How to set the Timer function
For On-PC Setup: See the Help menu
provided in “AX Remote Editor.”
For On-Remote Setup: See “Setting the
Timer” on page 59.
To quickly switch the Timer
on or off
With the Remote Commander (RM-
AX4000), you can quickly switch a Timer
function on or off.
The following procedure is based on the
assumption that a series of commands (a
macro) is programmed to the PROG1.
1 Press the TIMER button.
TIMER
The Timer numbers for which a Timer
is already set and is in standby mode,
stay lit. The available program
numbers flash on the Label keys.
If a page number such as “/1”
appears to the right side of Display
title, multiple pages are available.
Press the number to go to the next
page.
TIMER /1
SU
LEARN
NG
PROG1 PROG2 PROG3 PROG4
2 Select a standby timer program
that you want to switch on/off by
pressing the Label keys (in this
case, PROG1).
PROG1
The switching display for Timer of
PROG1 appears.
TIMER
SU
AM
OFF
LEARN
NG
PROG1
If you select a non-timer program, the
“NG” beep is heard and “NG” flashes
twice.
3 Press the ON/OFF key.
OFF
A single beep is heard and the “ ”
mark appears, and the standby mode
of the selected Timer is set to on.
TIMER
SU
AM
ON
LEARN
NG
PROG1
4 Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
Executing a series of commands at
a scheduled time (continued)