Filter
Top Products
36
10
Press the ON or OFF key to
select the fade effect of the
backlight.
ON: fade in/out backlight
OFF: normal backlight
The fade effect of the backlight
changes and a beep sounds each time
you press the keys.
11
Press the BACK button or the
COMMANDER OFF button.
BACK
or
OFF
COMMANDER
“LIGHT” appears as the Display title.
LIGHT
SU
LEARN
NG
OFF_TIME LEVEL FADE ON_MODE
12
Press “ON_MODE” on the Label
keys.
ON
_
MODE
The setting display for buttons to
activate the backlight appears.
The current setting is shown inside
the [ ], while the other flashes.
LIGHT
SU
LEARN
NG
ON_MODE LIGHT [ ALL ]
13
Press the LIGHT or ALL key to
select which buttons activate the
backlight.
LIGHT: The backlight is activated by
pressing the LIGHT button only.
ALL: The backlight is activated by
pressing any button on the Remote
Commander except the VOLUME +/–,
CHANNEL +/– and COMMANDER
OFF buttons.
The buttons to activate backlight
changes and a beep sounds each time
you press the keys.
Note
In the “ALL” position, if you use the
Remote Commander frequently, the battery
life may be shorter. In this case, shorten the
automatic-off time.
14
Press the BACK button or the
COMMANDER OFF button.
BACK
or
OFF
COMMANDER
“LIGHT” appears as the Display title.
LIGHT
SU
LEARN
NG
OFF_TIME LEVEL FADE ON_MODE
15
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
Setting the backlight (continued)