Filter
Top Products
Unit Settings
39
Calibrating the alignment
of the LCD display
You can calibrate the alignment of the
LCD display if the Touch-keys are not
working properly.
To change this setting, perform the
following procedure.
1
While pressing the
COMMANDER OFF button,
press the MENU button and EXIT
button.
MENU
EXIT
OFF
COMMANDER
The setting display for calibrating the
alignment of the LCD display
appears.
ALIGNMENT
SU
LEARN
NG
2
Press the point on the bottom-left
of the LCD display.
The other point appears on the top-
right of the LCD display.
ALIGNMENT
SU
LEARN
NG
3
Press the point on the top-right of
the LCD display.
The square appears in the center of
the LCD display.
ALIGNMENT
SU
LEARN
NG
4
Press the square in the center of
the LCD display.
When the calibration is complete, the
beep sounds, and the LCD display
returns to the selecting display of
display setting.
DISPLAY
SU
LEARN
NG
DISP-OFF ALIGN CONTRAST
Note
When calibrating, be sure to press the point
accurately, otherwise the calibration will be
off and you will need to start over.
5
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The Remote
Commander turns off.
Continued