Filter
Top Products
Unit Settings
37
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button or the COMMANDER
OFF button, the previous LCD display returns.
Setting the LCD display
Setting the automatic-off
time of the LCD display
The Remote Commander (RM-AX4000) is
preset at the factory to switch off the
LCD display automatically if you do not
operate it for more than 5 minutes.
To change this setting, perform the
following procedure.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
MUTING
OFF
COMMANDER
“SET” appears as the Display title.
SET
SU
LEARN
NG
LIGHT DISPLAY OTHER
If “DISPLAY” does not flash on the
Label keys, press the Display title
(SET) repeatedly until it appears.
Continued