Filter
Top Products
16
Installing the “AX
Remote Editor”
By installing the “AX Remote Editor”
software on the supplied CD-ROM onto
your PC, you can set up the Remote
Commander with your PC. “AX Remote
Editor” makes setting up complex
operations like a series of commands (a
macro) easy, and also allows various
other convenient functions that can only
be set up on the PC. For details, see the
Help menu provided in “AX Remote
Editor.”
“AX Remote Editor” system
requirements
Operating systems:
Windows XP Media Center Edition
2005/Windows XP Media Center
Edition 2004/Windows XP Media
Center Edition/Windows XP
Professional/Windows XP Home
Edition/Windows 2000 Professional
CPU:
Pentium II, 300 MHz or more
RAM:
64 MB or more (128 MB or more for
Windows XP)
Required hard disc capacity:
20 MB or more
Display:
High (16 bits) Color or higher,
1,024 × 768 dots or better*
CD-ROM drive
USB port
* Does not operate with a display of under
1,024 × 768 dots.
Installing the “AX Remote
Editor”
Follow the instructions below to install.
Notes
• Do not simply copy the “AX Remote Editor”
folder in the supplied CD-ROM to a PC. You
need to install it properly for it to work.
• On Windows 2000, or Windows XP, logon
with an authorized “Administrator” ID when
installing “AX Remote Editor.”
1 Close all software running on
Windows.
2 Insert the supplied CD-ROM into
the CD-ROM drive of the PC.
After a moment, “RM-AX4000 Install
CD Menu” appears.
3 Click [Install AX Remote Editor].
“AX Remote Editor 1.0 Setup”
appears.