Filter
Top Products
75
Additional Information
Others
Problem
I want to restore all the
settings.
I want to use multiple
components (such as a
DVD/VCR combo) with
XPRESS function.
I want to set a DVD
player for both XPRESS
DVD and XPRESS CD.
If the batteries die, are
the learned signals lost?
My PC cannot recognize
the USB connection.
Solution
In AX Remote Editor, click “Tools” on the menu bar, then select
“Update Firmware for Remote” to update the firmware of the
Remote Commander. If the firmware is updated, all the settings
or learned data of the Remote Commander are deleted and the
Remote Commander is set back to the factory setting.
When you have a multiple components (such as a DVD/VCR
combo), select only one of either component type. For example,
in the case of a DVD/VCR combo, select “DVD” or ”VCR”. If
you select both components, the XPRESS function will not work
properly.
For On-PC Setup: You can set multiple XPRESS functions for
one component. For example, when you watch a DVD, you can
set the sound to output from the TV. Or, when you listen to a
CD, you can set the sound to output from the RCVR (Receiver/
Amplifier).
For On-Remote Setup: You can set an XPRESS function for only
one component. Choose either XPRESS_DVD or XPRESS_CD.
No. The signals are not deleted because they are stored in the
nonvolatile memory.
• Make sure to install the USB driver properly (page 17).
• The batteries may be weak. Replace with new ones if the
battery icon appears.
• If the connection goes thorough the HUB, some PCs do not
recognize it. In this case, connect it directly to the USB port of
your PC.
• The Remote Commander does not work by the bus power. If
you use it in the USB mode, make sure to install new
batteries.
• Reconnect the USB mini cable to your PC.
• Restart your PC.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the Remote Commander to work
properly, call the Sony Customer Support Helpline at 1-800-822-2217.