Filter
Top Products
57
Setting by On-Remote Setup
Controlling the volume
of visual components
connected to an audio
component
The Remote Commander (RM-AX4000) is
factory preset based on the assumption
that you hear the sound of your visual
components from your TV speakers, and
that you hear sound of your audio
components from the loudspeakers
connected to your amplifier.
This feature enables you to control the
volume of your TV or amplifier without
selecting TV or RCVR each time to
control the volume.
For example, to control the volume while
using a VCR, you do not need to select
the TV to control the TV volume. With
the Remote Commander, you can switch
the volume of all the visual components
to the amplifier.
The following table shows the factory
setting of component/volume control.
Component Controls the volume of
TV TV
A-CBL TV
D-SAT TV
DVD TV
VCR TV
CD RCVR
RCVR RCVR
DVDVR TV
DVD-R TV
D-CBL TV
DAV DAV
PJ (Projector) PJ
TAPE RCVR
MD RCVR
LIGHT ———
However, if your visual components are
connected to an audio component, you
probably hear TV or VCR sound from the
loudspeakers via your amplifier, not
from your TV speakers. In this case, you
need to change the factory preset so that
you can control the volume of your
visual components without first having
to switch to the amplifier.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
MUTING
OFF
COMMANDER
“SET” appears as the Display title.
SET /1
SU
LEARN
NG
PRESET LEARN MACRO TIMER
Continued