Filter
Top Products
(E) 17-1
SIR-3400H / SIR-3032i / SIR-3032W
17. Control by Telnet
The ETHER (RJ45) connector on the rear panel of the unit uses a signal format compliant with TCP/IP. This
enables control from a host computer by connecting a LAN cable (sold separately).
c
Use a cross cable if the LAN cable is connected directly to another computer.
When controlling a recording unit using Telnet, use the ERR? and ALM? commands to monitor the recording
unit status.
TCP/IP (Telnet) connection
HOST IP address : 192.168.1.100 (default setting)
Port no. : 23
Login : xxxx
Password: sms
After entering this information, the commands can be executed.
Type “quit” to disconnect from Telnet.