Filter
Top Products
(E) 14-1
SIR-3400H / SIR-3032i / SIR-3032W
14.
Execution of Function/Checking
14-1. Save of Setting Values/Recall of Setting Values (Save/Recall Setup)
Saving the current settings and changing to other settings are done with a single operation.
The settings can be changed to the following settings.
. Setting values saved in the memory card
. Recording setting values for the current address
. Factory settings
c
If the settings are made here, all settings are changed with a single operation. Be sure to check the settings
before using this operation. (See section 6-1 for the factory settings.)
1 Press the F1 key in the Measurement screen.
The Utility screen is displayed.
2 Use the f / F key to select “Save/Recall Setup”.
3 Press the F1 key.
The Save/Recall Setup screen is displayed.