Filter
Top Products
SIR-3400H / SIR-3032i / SIR-3032W
[For U.S.A. and Canada]
THIS CLASS A DIGITAL DEVICE COMPLIES WITH
PART15 OF THE FCC RULES AND THE CANADIAN
ICES-003. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDERSIGNED OPERATION.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A
EST CONFORME À LA NORME NMB-003 DU
CANADA.
[For the customers in Australia]
Australian EMC Notice
This product complies with the following Australian
EMC standard.
AS/NZS CISPR11/2002 Emission Standard for
ISM Equipment
[For EU and EFTA countries]
CE Notice
Marking by the symbol CE indicates compliance with
the EMC directive and the Low-voltage directive of the
European Community. This marking shows
conformity to the following technical standards.
EN 55011 Group 1 Class A/1998 A1/1999 A2/2002 :
"Limits and methods of measurement of radio
disturbance characteristics of industrial, scientific and
medical (ISM) radio-frequency equipment"
EN 61000-3-2/2000 :
"Limits for harmonic currents emissions (equipment
input current 16 A per phase)"
EN 61000-3-3/1995 A1/2001 :
"Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current 16 A"
EN 61000-6-2/2001 :
"Electromagnetic compatibility (EMC) - Part 6-2 :
Generic standards - Immunity for industrial
environments"
EN 61010-1/2001 :
"Safety requirements for electrical equipment for
measurement, control and laboratory use Part 1:
General requirements"
For DC power-driven products to meet EN 61000-6-2/2001,
the following operational conditions must be satisfied.
1. Input and output signal cable length : 30 m or less
2. Cable length for input power source : 10 m or less
Note
When using the same cable for output signal and input
power source, the cable must not be longer than 10 m.
For AC power-driven products to meet EN 61000-6-2/2001,
the following operational conditions must be satisfied.
1. Input and output signal cable length : 30 m or less