Filter
Top Products
17-8 (E)
SIR-3400H / SIR-3032i / SIR-3032W
Command Contents
TSG : Test signal selection
Command format TSG : <1>/[ ]
<1> : Test signal selection
Analog channel
0=OFF
1=AC
2=+DC
3=_DC
4=GND
5=RSV
Related command : TSG?
UTL: Utility mode setting
Command format UTL : <1><2><3><4><5><6><7>
<1> : 0=None
1=Rebuild
<2> : 0=Contents in the drive 1 is reflected on the drive 2.
1=Contents in the drive 2 is reflected on the drive 1.
<3> : 0=None
1=The specified ID is deleted.
<4> : 100 digits ID
<5> : 10 digits ID
<6> : 1 digit ID
<7> : RSV
c
In case of <1> and <3>, when one is set to “1”, be sue to set the other to “0”.
Ex.) OK <1> : 1, <3> : 0
NG <1> : 1, <3> : 1
Related command : UTL?
c
When not selecting the mode, it all sets to ZERO.
17. Control by Telnet