Filter
Top Products
(E) 18-3
SIR-3400H / SIR-3032i / SIR-3032W
-System Error- ETA0 The condensation data is not set
-System Caution- DISK FULL No available space in HDD
ERA OFF Unable to overwrite
PNL OPN The front panel is open
OVR FLOW Data overflowed during recording
UDR FLOW Data was dropped during playback
18-3. Remedies for Operation Errors
18-3-1. When Power does not Turn On when Standby Switch is Held Down for
Two Seconds, or Key Operation is Disabled
1. Set the POWER switch to OFF.
2. Wait at least 15 seconds, and then set the POWER switch to ON.
3. Hold down the standby switch for two seconds again.
If operation is still not restored, set the POWER switch to OFF, unplug the power cable, and then contact
service engineer.
18. Errors and Error Messages