Filter
Top Products
(E) 17-7
SIR-3400H / SIR-3032i / SIR-3032W
Command Contents
RPT : Auto repeat
Command format RPT : <1>/[ ]
<1> : 0=Auto repeat stop, 1=Auto repeat start
Related command : RPT?
SCH : Search
Command format SCH : <1><2>...<N>/[ ]
ID number search
<1> : 0
<2><3><4> : 001 to 999 or 000
Real-time clock search
<1> : 1
<2><3>...<13> : YYMMDDhhmmss
Address search
<1> : 2
<2><3>...<8> : hhhmmss
Start ID search
<1> : 3
<2> : 0=Forward, 1=Backward
Ex.) SCH : 0100 — Target : ID=100
SCH : 1050506120000 — Target : 2005, May 6, 12:00:00
Related command : SCH?
n
When searching the ID increment, the search stops at the position of offset from
the start ID.
The address and the time code before one second are displayed.
SLF : Diagnostics
Command format SLF : <1>/[ ]
<1> : 0=Diagnostics stop, 1=Diagnostics start
Related command : SLF?
SPD : Recording/playback speed setting
Command format SPD : <1>
<1> : 0=1 x (normal speed), 1=1/2 x, 2=1/4 x, 3=1/8 x, 4=1/16 x, A=x2,
B=x4, F=EXT
Related command : SPD?
SYN : Selecting synchronous playback
Command format SYN : <1>/[ ]
<1> : 0=The master playback while the subordinate stops. (Default)
1=Both the master and the subordinate restart synchronous play back.
Related command : SYN?
TIM : Real-time clock setting
Command format TIM : <1><2>...<12>
<1><2> : Year (last 2 digits)
<3><4><5><6> : Month and date
<7><8><9><10><11><12> : Hours, minutes and seconds
Related command : TIM?
TRG : Trigger setting
Command format TRG : <1>
<1> : 0=RSV
1=Pre-trigger single mode (low: start)
2=Pre-trigger multi mode (low: start, high: stop)
3=Normal single mode (low: start)
4=Normal multi mode (low: start, high: stop)
Related command : TRG?
TRM : Terminator selection
Command format TRM : <1>
<1> : 0=CR + LF, 1=CR, 2=LF
This sets the break code for replies from the recording unit. The default is (CR +
LF).
Related command : TRM?
17. Control by Telnet
.
.
.