Filter
Top Products
(E) 14-3
SIR-3400H / SIR-3032i / SIR-3032W
14-2. Copying Mark1/Mark2 (Copy)
For information about Mark1/Mark2, see section “12-12. Mark Settings”.
The location to be copied is selected from three available patterns.
The copied information is pasted to the end of the data.
Data covering multiple IDs cannot be copied.
1 Press the F1 key in the Measurement screen.
The Utility screen is displayed.
2 Use the f / F key to select “Copy”.
3 Press the key corresponding to the copy location.
From beginning of ID to Mark1 (B-Mark1) : F1 key
From Mark1 to Mark2 (Mark1-2) : F2 key
From Mark1 to end of ID (Mark1-E) : F3 key
The copy operation is performed.
c
The copy operation will not be performed when the F2 key is pressed unless Mark1 and Mark2 are
within the same ID.
Beginning EndMark1 Mark2
F1 F2
F3
14. Execution of Function/Checking