Speco Technologies PC Pro Series DVR User Manual


 
21
Name Function
(1) Exit
- Guest: Switch to the guest mode. In guest mode, user only can
control DVR by using the remote controller (see also Chapter 2.2.1
)
and the control panel of DVR (see also Chapter 1.4.1
). The
functions are limited to preview and playback function only. For
complete functions of DVR, please login as an administrator.
- Cancel: To exit Logout dialog box
- About: To update patch or find about the software info.
(2) Volume Adjust the audio volume to a proper volume.
(3) Split Screen
Mode
It provides 7 kinds of split display modes for your selection. You can
select one of the split display modes by clicking the following icon.
1-Cam display
4-Cam split display
9-Cam split display
16-Cam split display
8-Cam split display
13-Cam split display
i
- If there are only 4 cameras, you won’t be able to switch to 9, 13, and 16 split
screen mode.
- The DVR system will save the current operating mode (split screen mode,
sequence, full screen, and compact mode status) when shutdown DVR
application and apply the mode for next login.
- When you are in single screen mode, Right click and Drag a square on the
area you want to enlarge.
- When you are in multiple-screen mode, Right click the video screen of the
camera and Drag on where you want to relocate it. To only display one of the
video screens in the multiple-screen mode, Left click on the video screen you
only want to display.
(4) Record
Click
to allow recording. The button turns violet when it is in
recording mode. Click it again to stop record mode.
(5) E-Map
Click
to load up to 8 desired E-Maps in BMP or JPG image
format, and locate cameras, sensors, and relays to desired positions.
(6) Network
Click
to allow inbound connections. When this function is
enabled, the button turns violet. Click it again to disable all inbound
connections.