Filter
Top Products
68
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail
(see also Chapter 4.9.5
).
- Start Recording
Record the video from the selected camera. To setup click Detail (see also Chapter
4.9.6).
- SMS (Short Message Service)/MMS (Multimedia Messaging System)
SMS transmits only text messages to mobile phone. MMS transmits text messages and
images over wireless networks using the wireless application protocol (WAP). Make
sure your mobile phone support this feature and your PC is connected to GSM/GPRS
modem. To setup click Detail (see also Chapter 4.9.7
).
- PTZ preset point
Position the PTZ camera based on the preset point setting. To setup click Detail (see
also Chapter 4.9.8
).
- Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is activated. To
setup click Detail (see also Chapter 4.9.9
).
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated
(see also Chapter 4.9.10
)
- Launch Program
To call up the external program that is provided by 3rd party. Click Detail and click
to locate the program path. Enable Multiple instance check box to allow the program
can be executed many times at the same time.
- Snapshot
Take a snapshot when the alarm is activated.
a. Select Camera: specify which channel video to be snapshot when the alarm is
occurred.
~ Alarm Camera: when a channel has an alarm occurred, and then, the DVR
system will snapshot the channel video.
~ Camera # (1~32): the selected channel would be snapshot when an alarm is
occurred.
b. Video Size: select the size of
snapshot picture.
c. Number of picture: the number of
picture that is going to be taken.
d. Snapshot Interval: a time gap for
next snapshot
e. Save Path: a storage path for saving
snapshot pictures.