Speco Technologies PC Pro Series DVR User Manual


 
36
3.12 To Setup the PTZ/IP PTZ Camera
3.12.1 Setup the PTZ Camera
1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, select the camera number and check the Use PTZ
box.
3. In the Connection Settings section, select the COMPort where the PTZ camera is connected,
PTZ ID number and PTZ camera protocol. Then, click Save to keep the settings.
4. Use the PTZ control panel and adjust the position of the PTZ camera.
5. In the Preset Setting section, select the preset number to assign a number for the PTZ
camera current position. Set the DwellTime (1-60 sec) for how long the PTZ camera stays in
that position before it moves to the next one. If you want to add description, check the Show
Preset Name box and in the Preset Name text box, type the word. When done, click Save to
keep the settings.
6. Repeat step 4 & 5, if you want to save another PTZ camera position.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ
camera has been moved. Mark the check box and set the time period in second.
8. When done, click OK to save the setting or Click Cancel, to leave without saving the new
setting.