Speco Technologies PC Pro Series DVR User Manual


 
55
4.4 Network Setting
In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number(s) in the Transmitting Camera section you want to make
accessible via internet using WebViewer, Remote Console, PDA Viewer and HandyViewer (still
image). To select all the cameras, enable the ALL check box.
(3) Server IP
Set the Server IP and Remote Console Port number. The system will automatically detect your
Server IP address. You need this when accessing DVR server from the remote location via
internet.
(4) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, first register your domain name on the
following Web site http://ddns.dss.com.tw
1. User Login
Browse the website ddns.dss.com.tw
with Microsoft IE or Netscape Navigator to access
the following dialog.You will be prompted to enter CD key number, product name,
password, and user information. Use this service if the IP address changes each time
when you connect to internet.
- First input CD-Key number (serial number) and select the product name.
- Then click OK to login or Reset to clear the previous input.