Filter
Top Products
73
4.9.8 To Setup PTZ Preset Point:
Beside the PTZ preset point check box, click Detail. In the
Trigger PTZ Preset Setting dialog box, select the PTZ
camera number then select the Enable check box. Select
the position of the PTZ camera when the alarm is
activated and ended. For the PTZ camera ended point,
user also can select one preset position or Auto Pan
between preset position groups.
4.9.9 To Setup Alarm SOP:
Beside the Alarm SOP check box, click Detail. In the
step text boxes, type the standard protocol when the
alarm is activated. When the alarm is activated the
Standard Operation Procedure dialog box will appear.
Just click Next to see the next instruction, Back to see
the previous instruction, Finish to end and Abort to
terminate.
4.9.10 To Setup CMS Setting
Beside the Send to CMS check box, click Detail. In the
CMS Setting, select the camera to enable/disable
sending the video to CMS. Enable All to select all
cameras. Then, click OK to accept the new settings
and Cancel to exit without saving.