Filter
Top Products
69
4.9.1 To Setup Alarm Relay:
1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available
relay list and in the ON column, set to enable/disable the
relay operation when the alarm is activated.
3. In the Retrieve time check box, you may enable/disable to
extend the relay operation time and set the duration in
second.
4. Click OK to exit and accept the setting and Cancel to exit
without saving the setting.
4.9.2 To Setup the Alarm Sound Setting:
1. Beside the Play Warning Sound check
box, click
Detail
.
2. In the Alarm Sound Setting dialog box,
click
to select other wav file from
other source or folder,
Play
to listen,
Record
to make a new copy of a sound.
3. If you click
Record
, you will be prompted
if you want to replace the file. Click
OK
to
continue and
Cancel
to discontinue.
4. When the Sound Recorder appears, use
the record control panel to record, stop,
play, rewind and forward. If you want to
keep the existing file, click
File
>
Save
As
…, enter filename and click
Save
.
Make sure you have microphone
connected to your PC.
5. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.