Filter
Top Products
80 Troubleshooting and How to
ing down the 0 button on the remote control while you start
the system, until the picture has appeared. You should then
open the Archive list, and move to the ProgramFiles section
by pressing Fast Forward or Rewind. Open the Auto Start
folder, and either delete the applications contained in it, or
move them to the main ProgramFiles folder, so that they do
not run when the PVR is turned on.
Although interactive services are useful, they too are, essen-
tially, computer programs that are delivered to your PVR via
the digital television signal, and it is possible, though extremely
rare, for them to cause problems. Should you suspect that this
is the case, you should try disabling interactive services via
the System Setting menu.
7.1.4 Incorrect channel numbers and duplicate channels
If you can receive a signal from more than one TV transmit-
ter, your PVR may store duplicate versions of some channels.
In some cases, duplicates will appear on numbers from 1000
upwards, while other users may have two channels with the
same number.
If you have two channels with the same number, and one of
them has a very weak signal, you should delete the one with
the weaker signal; press the OK/List button to display the
channel list, highlight the channel you want to remove, and
press Red to display a menu, from which you can select the
Delete option.
You can view information about the strength and quality of
a signal by changing to a channel, then pressing Menu and
selecting Installation, then Service Search. Details of the signal
on the current channel will be displayed at the bottom right of
the screen.
Users with many duplicate channels, or incorrectly numbered
channels, should perform a factory reset of their PVR, and
then tune in channels manually, instead of automatically.