Filter
Top Products
280 VT1422A Command Reference Chapter 7
DIAGnostic
DIAGnostic:CUSTom:MXB
DIAGnostic:CUSTom:MXB <slope>,<offset>,(@<ch_list>) sends the <slope>
and <offset> parameters that allow the driver to calculate and download a custom
linear Engineering Unit Conversion table to the VT1422A. Use the
“[SENSe:]FUNCtion:CUSTom” on page 340 to link this custom EU conversion
with channels in <ch_list>.
Parameters
Comments • <slope> specifies the linear function’s "slope":
• The <offset> parameter specifies the conversion offset at zero input volts. This
parameter is also commonly known as the "Y-intercept."
• <ch_list> specifies which channels may use this custom linear function.
• Related Commands: [SENSe:]FUNCtion:CUSTom (<ch_list>)
• *RST Condition: All custom EU tables erased
• Send with VXIplug&play Function: hpe1422_cmd(...)
DIAGnostic:CUSTom:MXB
DIAGnostic:CUSTom:MXB <slope>,<offset>,(@<ch_list>) sends the <slope>
and <offset> parameters that allow the driver to calculate and download a custom
linear Engineering Unit Conversion table to the VT1422A. Use the
“[SENSe:]FUNCtion:CUSTom” on page 340 to link this custom EU conversion
with channels in <ch_list>.
Parameters
Comments • <slope> specifies the linear function’s "slope":
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
slope numeric (float32) limit of float32 none
offset numeric (float32) limit of float32 none
ch_list channel list (string) 100 - 163 none
f
outp1
f
outp0
–()V
in1
V
in0
–()⁄
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
slope numeric (float32) limit of float32 none
offset numeric (float32) limit of float32 none
ch_list channel list (string) 100 - 163 none
f
outp1
f
outp0
–()V
in1
V
in0
–()⁄